About The Rotate Toner Key; When Replacing A Toner Cartridge - Konica Minolta magicolor 1600W User Manual

About the Rotate Toner KEY

The Rotate Toner key allows you to switch the printer from normal operation
mode to Change Toner mode, Eject All Toner mode or Print Head Cleanup
mode.
The mode that the printer enters depends on how long the Rotate Toner key
is held down.
Length of time that
the Rotate Toner key
is held down
Less than 5 seconds
5 to 9 seconds
More than 10 seconds
The Rotate Toner key is used in the following situations.

When replacing a toner cartridge

When removing all toner cartridges
When cleaning the print head window
When replacing a toner cartridge
Press the Rotate Toner key.
The printer enters Change Toner mode.
For details on replacing a toner cartridge, refer to "Replacing a Toner
Cartridge" on page 5-5.
To return to normal operation mode from Change Toner mode, press
the Clear key.
1-6
Mode that the printer
enters
Change Toner mode
Print Head Cleanup
mode
Eject All Toner mode
When the printer is switched to any of these operation modes, the
magenta toner indicator lights up.
Indicators on the
control panel
-
All indicators blink once
after the key has been
held down for 5 sec-
onds.
All indicators flash once
after the key has been
held down for 10 sec-
onds.
About the Control Panel