Pen; Changing The Pen Battery; Replacing The Pen Tip - Pioneer PDP-503CMX - 50" Plasma Panel Operating Instructions Manual

NAME AND FUNCTION OF PARTS

Pen

Holes in rear end of pen
LED indicator
Tip
Cap
Small button
(The function corresponding to middle
mouse button can be assigned using
the driver software.)
Pen tip
(corresponds to left mouse button)

Changing the Pen Battery

Battery cover

Replacing the Pen Tip

If the tip becomes deformed and writing quality
deteriorates, replace the tip with one of the
supplied extras.
1. Pull out the tip.
Battery cover
Large button
(corresponds to right
mouse button)
AAA (LR03) alkaline battery
If pen operation becomes difficult:
The pen may fail to operate properly if the holes in
rear end of pen are blocked. Also, the pen may
begin operating erratically when the battery
becomes depleted. In this event, change the
battery at your earliest opportunity.
Confirming Battery Life:
When the small button is depressed fully, an LED
indicator will light. If the indicator fails to light, or
lights only dimly, the battery is depleted and
should be replaced.
NOTES:
÷ Insert battery correctly, aligning +/– polarities
with the indications on the battery case.
÷ To prevent damage from battery leakage,
remove the battery when not using the pen for
an extended period (1 month or more). If battery
leakage occurs, wipe away any battery fluid
from inside the case and replace the battery
with a new one.
÷ The provided alkaline battery should not be
recharged, short-circuited, disassembled, or
disposed of in fire.
÷ When disposing of used batteries, please
comply with governmental regulations or
environmental public instruction's rules that
apply in your country / area.
CAUTION:
If you continue using a pen with a damaged or worn
tip, the monitor screen may be damaged.
2. Insert a new tip.
19
En