Picture/Screen Adjustment; Picture Adjustment - Pioneer PDP-427CMX Operating Instructions Manual

PICTURE/SCREEN Adjustment

PICTURE adjustment

Remote control unit
DISPLAY
STANDBY/ON MENU
/ SET
MENU SET
Main unit operating panel
1
Press the MENU button to display the menu
screen.
M E N U
P I C T U R E S C R E E N
C O N T R A S T
B R I G H T N E S S
H . E N H A N C E
V. E N H A N C E
P I C T U R E R E S E T
SET ENTER
2 Use the 5/∞ buttons to select the adjustment
item, then press the SET button.
M E N U
P I C T U R E S C R E E N
C O N T R A S T
B R I G H T N E S S
H . E N H A N C E
V. E N H A N C E
P I C T U R E R E S E T
SET
ENTER
26
En
MENU
2/3
SET
5/∞
INPUT SCREEN SIZE – VOL +
5/∞ 2/3
I N P U T 1
S E T U P O P T I O N
0
:
0
:
0
:
: 0
MENU EXIT
I N P U T 1
S E T U P O P T I O N
: 0
:
0
: 0
: 0
MENU
EXIT
3
Use the 2/3 buttons to adjust the picture quality
as desired.
B R I G H T N E S S
SET SET
4
Press the SET button.
Pressing the SET button writes the value into the
memory and returns the display to the step 2 screen.
5
When the setup is finished, press the MENU
button to exit the menu screen.
Note
Make these adjustments for each input (INPUT1 or INPUT2) and
signals.
[PICTURE] mode adjustment items
Below are brief descriptions of the options that can be set
in the [PICTURE] mode.
CONTRAST ············· Adjust according to the surrounding
brightness so that the picture can be
seen clearly.
BRIGHTNESS ·········· Adjust so that the dark parts of the
picture can be seen clearly.
H. ENHANCE ··········· Sharpens the image in the horizontal
direction.
V. ENHANCE ··········· Sharpens the image in the vertical
direction.
To reset [PICTURE] mode settings to the default
If settings have been adjusted excessively or the picture
on the screen no longer appears natural, it may prove
more beneficial to reset the [PICTURE] mode to default
settings instead of trying to make adjustments under
already adjusted conditions.
1 In step 2 in the previous procedure, use the 5/∞
buttons to select [PICTURE RESET], then press the
SET button.
P I C T U R E R E S E T ?
Y E S
SET SET
2 Use the 2/3 buttons to select [YES], and press
the SET button.
All [PICTURE] mode settings are returned to the
factory set default.
0
:
MENU EXIT
N O
MENU EXIT