Reduces Power Consumption - Panasonic 58PF12UK - TH - 58" Plasma Panel Operating Instructions Manual

Reduces power consumption

• POWER SAVE:
• STANDBY SAVE:
• POWER MANAGEMENT:
• AUTO POWER OFF:
1
2
3
40
When this function is turned ON, luminous level of the Plasma Display is suppressed, so
power consumption is reduced.
When this function is turned ON, power consumption of the microcomputer is reduced during
power supply standby (see page 13, 16, 17), so standby power of the set is reduced.
When this function is set to ON, it operates under the following conditions to turn the power
on or off automatically.
When no pictures (HD/VD sync signals) are detected for 30 or so seconds during PC signal
input:
→ Power is turned off (standby); the power indicator lights up orange.
When pictures (HD/VD sync signals) are subsequently detected:
→ Power is turned on; the power indicator lights up green.
Notes:
• This function operates only during PC signal input.
• This function is invalid during input from PC Input Terminal Board (TY-42TM6P).
• This function is effective when "SYNC" is set to "AUTO", "COMPONENT / RGB-IN SELECT"
is set to "RGB" and during normal viewing (one picture screen).
Equipment power supply is turned OFF when there is no signal.
When this is set to On, the power supply of the unit goes Off 10 minutes after the input
signals stop.
Note:
This function is effective during normal viewing (one picture screen) for input signals except
PC IN terminal.
Press to select
"POWER SAVE"
"STANDBY SAVE"
"POWER MANAGEMENT"
"AUTO POWER OFF".
Press to select "ON" or "OFF".
On Off
Press to exit from SET UP.
SET UP
SIGNAL
SCREENSAVER
EXTENDED LIFE SETTINGS
COMPONENT/RGB-IN SELECT
RGB
INPUT LABEL PC
POWER SAVE OFF
STANDBY SAVE OFF
POWER MANAGEMENT OFF
AUTO POWER OFF OFF
ENGLISH ( US )
OSD LANGUAGE
1/2