Maytag MEW6530DDW - 30" Convection Single Oven Use And Care Manual page 17

5. Press t heAutoset padtoscroll t hrough the Autoset
stir-cleaning s ettings.
"HVy" ( Heavy S oil4 hours}
"MEd" ( Medium Soii, 3 hours}
"LITE" (Light S oil2 hours}
Choosing thesoiibveioftheoven automatically programs
thesdf-cbaning time.
6. Afterfourseconds, theCLEAN andDELAY i cons willHight
andtheLOCK iconwillflashinthedispiay. W hen the
oven doorHatches, theLOCK iconwillstop flashing and
Hight condnuousiy toshow thattheoven issetfora
ddayed deanoperation. The ddaytimewilldisplay.
After Seff-C eaning
About one hour after the end of the self-dean cycle, the
LOCK icon will turn off. The door can then be opened.
Some soil may leave a light gray, powdery ash. Remove
it with a damp cloth. If soil remains after wiping, that means
the clean cycb was not long enough. The soil will be re-
moved during the next dean cycb.
mfoven racks were left in the oven and do not slide
smoothly after a clean cycle, wipe racks and rack supports
with a small amount of vegetaMe oil to make them easier to
move.
Fine lines may appear in the porcelain because it went
through heating and cooling, This is normal and will not
affect performance.
A white discoloration may appear after cleaning if acidic
or sugary foods were not wiped up before the self-clean
cycle. This discobration is normal and will not affect perfor-
mance.
During the Seff-CRean Cycle
When LOCK shows in the display, the door cannot be opened,
To prevent damage to the door, do not force the door open
when LOCK is displayed,
Smoke and Smells
You may see some smoke and smell an odor the first few
times the oven is cleaned. This is normal and will lessen in
time.
Smoke may also occur if the oven is heavily soiled or if a
broiler pan was left in the oven.
Sounds
As the oven heats, you may hear sounds of metal parts
expanding and contracting. This is normal and will not
damage the oven.
If the oven door is left open, "door" wiii flash in the
display and a signal will beep until the door is closed
and the Clean pad is pressed again.
If more than five seconds elapse between pressing the
Clean pad and the Autoset pad, the program will
automatically return to the previous display.
A cooling fan will turn on during the self-clean cycle and
will automatically turn off after the clean cycle when the
oven has cooled. If it does not operate, contact an
authorized servicer.
The oven door wiii be damaged if the oven door is
forced to open when the LOCK icon is still displayed.
16