The Process Of Burning A Disc Does Not Begin, Or It Stops Before Completion - HP KR922UT - 2133 Mini-Note - C7-M 1 GHz Multimedia User Manual

The process of burning a disc does not begin, or it stops
before completion
●
Be sure that all other programs are closed.
●
Turn off Sleep mode and Hibernation.
●
Be sure that you are using the right kind of disc for your drive. See Chapter 5, "Optical drive," for
more information about disc types.
●
Be sure that the disc is inserted properly.
●
Select a slower write speed and try again.
●
If you are copying a disc, save the information on the source disc to your hard drive before trying
to burn the contents to a new disc, and then burn from your hard drive.
●
Reinstall the disc-burning device driver located in the DVD/CD-ROM drives category in Device
Manager.
30 Chapter 7 Troubleshooting