Table of Contents
Advertisement
Registering One-touch Speed Dialing Numbers and
Names
One-touch speed dialing allows you to dial a number by pressing a single button. Before you can use
one-touch speed dialing, you must register the receiving number with your fax.
You can also register the name of the party; the name appears on the printout of the ONE-TOUCH
SPEED DIAL TELEPHONE NO. LIST.
Note
It is recommended to print out a copy of the ONE-TOUCH SPEED DIAL TELEPHONE NO. LIST and keep
it for reference.
See "Activity Reports" on page 48 for details on printing the list.
1
Press [Menu].
2
Use [{] or [}] to select <TEL REGISTRATION>, then press [Start/Copy]. The LCD
displays <1-TOUCH SPD DIAL>.
3
Press [Start/Copy]. The LCD displays <01=>.
4
Use [{] or [}] to select the number of the one-touch speed dialing button (01-09)
under which you want to register the number, then press [Start/Copy] twice.
If a number is already registered under this one-touch speed dialing button, the number is
displayed on the LCD.
5
Enter the party's number (up to 40 digits) using the numeric buttons, then press
[Start/Copy] twice.
TEL=250xxx_
6
Enter the party's name (up to 16 letters) using the numeric buttons, then press
[Start/Copy] to register the name (see page 13).
CANON
Note
To delete the name and number registered under the one-touch speed dialing button, press [Clear]
and [Start/Copy] after you perform steps 1 to 4.
7
To assign additional one-touch speed dialing numbers, repeat from step 4.
To finish, press [Stop/Reset].
18
Before Using Your Machine
:A
Advertisement
Table of Contents
