Table of Contents
Advertisement
SERVICE AND ADJUSTMENT
HOW TO REPLACE
THE MOWER
DRIVE BELT
1.
2.
3.
4.
Remove
the mower
housing.
See the instructions
on "How To
Remove
The Mower
Housing".
Pull the belt retainer away from the idler pulley and remove
the mower drive belt (Figure 39).
Pull the brake pad away from the jackshaft pulley and remove
the mower drive belt.
NOTE: Replace the mower drive belt with an original
equipment belt purchased from a Sears Service Center.
Install the new mower drive belt. Pull the brake pad away
from the jackshaft pulley. Put the mower drive belt around
the jackshaft pulley.
5.
Pull the belt retainer away from the idler pulley. Put the mow-
er drive belt around the idler pulley.
6.
Make sure the "V" side of the mower drive belt is against the
jackshaft
pulley and the idler pulley.
7.
Install
the mower
housing.
See the instructions
on "How
To
Install
The Mower
Housing".
8.
Before
you mow, check the attachment
clutch.
See the instruc-
tions on "How To Adjust
The Attachment
Clutch".
Mower Drive Belt
Idler Pulley
Belt Retainer
Jackshaft Pulley
Figure 39
MS-3620MA
32
Advertisement
Table of Contents
