Initializing Tpm Chip - Samsung NP350E7C User Manual

Using the TPM Security Device
Initializing the TPM chip
When you use the TPM function for the first time or you want to
register the user again, you have to initialize the TPM chip.
• Initializing the TPM chip erases all authentication
information saved on the TPM chip. Any decision to
initialize must be taken carefully.
• To initialize the TPM chip again while the TPM function is
in use, you have to decrypt any existing files and folders
encrypted by the TPM function first. Otherwise, you
will not be able to access the files and folders after re-
initialization.
1
Restart the computer.
When the Samsung logo screen appears, press the F2 key
repeatedly.
(Optional)
2
If the BIOS screen appears, select the Security > TPM
Configuration item and press Enter.
SysInfo
Supervisor Password
User Password
HDD Password
Set Supervisor Password
Set User Password
Set HDD Password
Password on Boot
TPM Con guration
3
Set the TPM Support item to Enabled and set the Change
TPM Status to Clear.
4
Press the F10 key to save the changes.
Aptio Setup Utility
Advanced Security
Clear
Clear
Clear
[Enter]
[Enter]
[Enter]
[Enabled]
Aptio Setup Utility
Security
TPM Configuration
TPM Support [Enabled]
Change TPM Status [No Change]
Security Chip State Disabled and Deactivated
No Change
Clear
Enable and Activate
Disable and Deactivate
Chapter 3.
65
Using the computer
Boot Exit