›
Set the static IP settings
1
In Idle mode, open the application list and select
Wi-Fi.
→
2
Select a network, and select the check box next to
advanced options.
3
Select the
4
Static.
Select
5
Change the IP settings for the access point such as IP
address, Network prefix length, Gateway, DNS.
6
Connect.
Select
Wi-Fi Direct
Learn to use the Wi-Fi Direct feature to connect two devices
via a WLAN without requiring an access point.
›
Connect your device to another WLAN device
1
In Idle mode, open the application list and select
→
More...
2
OFF next to Wi-Fi Direct and then select OK.
Select
3
Scan.
Select
4
Select a device and then select
When the owner of the other device accepts the
connection, pairing is complete.
5
To deactivate the Wi-Fi Direct feature, select
connection.
IP settings drop-down menu.
→
Wi-Fi Direct.
OK.
Connectivity
108
Settings
Show
Settings
End