Advanced Setting - LG BP325W Owner's Manual

Advanced Setting

If you want to set the network settings manually,
use w/s to select [Advanced Setting] on the
[Network Setting] menu and press ENTER (b).
1. Use w/s to select [Wireless] and press ENTER
(b).
[AP List] - Scans all available access points or
wireless routers within range and display them
as a list.
[Network name (SSID)] – Your access point
may not be broadcasting its network name
(SSID). Check your access point settings through
your computer and either set your access
point to broadcast SSID, or manually enter the
network name in [Network name(SSID)].
[PBC] – If your access point or wireless
router that supports the PBC (Push Button
Configuration) method, select this option and
press the Push Button on your access point
within 120 counts. You do not need to know the
network name (SSID) and security code of your
access point.
[PIN] – If your access point supports the PIN
Code configuration method based on WPS(Wi-
Fi Protected Setup), select this option and
note the code number on the screen. And
then, enter the PIN number on a setting menu
of your access point to connect. Refer to the
documentation for your network device.
2. Follow the instructions of each connection
method on the screen.
,
Note
To use PBC and PIN network connection,
security mode of your access point must be
set to OPEN or AES.
Connecting 23
2