The wrinkle release option helps prevent wrinkles
and tangling by alternately tumbling the load with-
out heat for 5 minutes in a clockwise direction, then
5 minutes in a counterclockwise
direction, for a total
of 45 minutes. A signal will sound every 5 minutes
to remind you to remove the dry load at any time.
The extended tumble option can be selected with
wrinkle release to increase the amount of time the
load will tumble without heat. Use this combination
if you know it could be up to 3 hours before you
can remove the load.
Select the delicate
heat option to protect a load
from excessive heat which can lead to shrinking
and over-drying. The drying temperature
gradually reduced as the load dries.
Select the extended
tumble option if the dried
load might not be removed promptly at the end of
the cycle. The dry load will tumble without heat in
a clockwise direction only for the selected time to
help reduce wrinkling. Press the extended
button to select 10 or 30 minutes or 1,2 or 3 hours
tumbling. A signal will sound periodically to remind
you to remove the dry load at any time.
release option can be selected with
tumble option to increase the amount
of time the load will tumble without heat. Use this
if you know it could be up to 3 hours
before you can remove the load.
tumble option uses reverse tumble
action during cool down to reduce tangling and
WAdd steam option available on Steam Model only.