Restoring Factory Settings In Computer Setup; Computer Setup Menus; File Menu - HP 2730p - EliteBook - Core 2 Duo 1.86 GHz Maintenance And Service Manual

Restoring factory settings in Computer Setup

✎
Restoring defaults will not change the hard drive mode.
To return all settings in Computer Setup to the values that were set at the factory, follow these steps:
1. Turn on or restart the computer, and then press
displayed at the bottom of the screen.
2. Press to enter BIOS Setup.
3. Use a pointing device or the arrow keys to select File > Restore defaults.
4. Follow the on-screen instructions.
5. To save your changes and exit, click the Save icon in the lower-left corner of the screen, and then follow the
on-screen instructions.
– or –
Use the arrow keys to select File > Save changes and exit, and then press
Your changes go into effect when the computer restarts.
✎
Your password settings and security settings are not changed when you restore the factory settings.

Computer Setup menus

The menu tables in this section provide an overview of Computer Setup options.
✎
Some of the Computer Setup menu items listed in this chapter may not be supported by your computer.

File menu

Select
System Information
Set System Date and Time
Restore defaults
Ignore changes and exit
Save changes and exit
Maintenance and Service Guide
while the "Press the ESC key for Startup Menu" message is
To do this
■ View identification information for the computer and the batteries in
the system.
■ View specification information for the processor, cache and memory size,
system ROM, video revision, and keyboard controller version.
Set or change the date and time on the computer.
Replace the configuration settings in Computer Setup with the original factory
settings. (Hard drive mode, password settings, and security settings are not
changed when you restore the factory settings.)
Cancel any changes entered during the current session. Then exit and restart
the computer.
Save any changes entered during the current session. Then exit and restart the
computer. Your changes go into effect when the computer restarts.
Computer Setup
.
5–3