Fan Module - Cisco AJ732A - MDS 9134 Fabric Switch Installation Manual

Nexus 5010 Switch
S e n d d o c u m e n t a t i o n c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
Table 1-5
Power Supply Condition
Power supply warning events where the power supply
continues to operate. These events include high
temperature, high power, and slow fan.
AC present, 3.3 voltage standby (VSB) on, and the power
supply unit is off.
Power supply on and OK.
If one power supply is installed in the chassis, but the other power supply slot is empty, a blank filler
panel should be used to cover the empty slot.
Figure 1-31

Fan Module

The Cisco Nexus 5010 switch has slots for two fans modules. Each fan module houses six fans. The
combination of 6-fans per module and 2-modules provides the switch with a total of
shows the fan module.
Cisco Nexus 5000 Series Hardware Installation Guide
1-26
Power Supply LED Descriptions (continued)
Blank Power Supply Filler Panel
Power LED Status
Off
1 Hz blinking
On
Figure 1-31 shows a blank power supply filler panel.
Chapter 1 Product Overview
Fail LED Status
1 Hz Blinking
Off
Off
12-fans.Figure 1-32
OL-15902-01