HP A7533A - Brocade 4Gb SAN Switch Base Release Note page 22

Hp storageworks fabric os 6.1.0h release notes (5697-7961, january 2009)

Hide thumbs Also See for A7533A - Brocade 4Gb SAN Switch Base:

Table of Contents

Closed defect summary

The switch status is shown as Healthy with one core blade even when

the policy is set to show as marginal on removal/failure of a core

blade.

FICON Tape Pipelining with specific tape devices results in block count

mismatch errors.

A DC Director might erroneously report a failed attempt at reading a

temperature sensor as -1° Celsius.

On an FR4-48 with FMS enabled, duplicate port names for some ports

that share the same address.

IFCCs caused by incorrect positioning for FICON Read Tape Pipelining.

Management server GMAL command is being rejected with reason

5, Logical Busy.

FCIP Compression enhanced to take advantage of higher compression

rates.

Solution

Fixed in Fabric OS 6.1.0

Table of Contents