Removing The Left-Side Cover; Installing An Adapter - IBM 7977E7U User Manual

User manual
Hide thumbs Also See for 7977E7U:
Table of Contents

Advertisement

3. Press on the left edge of the bezel, and rotate the left side of the bezel away

Removing the left-side cover

Important: Before you install optional hardware, make sure that the server is
working correctly. Start the server, and make sure that the operating system starts,
if an operating system is installed, or that a 19990305 error code is displayed,
indicating that an operating system was not found but the server is otherwise
working correctly. If the server is not working correctly, see the Problem
Determination and Service Guide for diagnostic information.
Cover release latch
To remove the cover, complete the following steps:
1. Read the safety information that begins on page v and "Installation guidelines"
2. Turn off the server and all attached devices.
3. Disconnect all external cables and power cords.
4. Using the supplied key, unlock the left-side cover.
5. Pull the cover-release latch down and rotate the top edge of the cover away
6. Remove the left-side cover from the server.

Installing an adapter

The following notes describe the types of adapters that the server supports and
other information that you must consider when you install an adapter:
v Locate the documentation that comes with the adapter and follow those
v Avoid touching the components and gold-edge connectors on the adapter.
v PCI slot 6 supports half-length 5.0 V PCI adapters only.
v PCI slot 1 supports half-length 3.3 V PCI adapters only.
24
IBM System x3500 Type 7977: User's Guide
from the server. Rotate the left edge of the bezel out beyond 90°; then, pull the
bezel away from the server.
Lock
Left-side cover
on page 21.
from the server.
Attention:
For proper cooling and airflow, replace the cover before you turn
on the server. Operating the server for extended periods of time (more than 30
minutes) with the cover removed might damage server components.
instructions in addition to the instructions in this section. If you must change the
switch or jumper settings on the adapter, follow the instructions that come with
the adapter.

Advertisement

Table of Contents
loading

This manual is also suitable for:

7977d2u7977e3uSystem x3500 type 7977

Table of Contents