Restoring Factory Default Settings; Viewing Tutorial Videos - HP KY616AA - DreamScreen 100 Wireless Connected Screen User Manual

Restoring factory default settings

NOTE: This does not remove any personal data from your HP DreamScreen.
1 Use or
2 Press OK.
3 Press to select Info.
4 Press OK to open the System Information page.
5 Press and then
6 Press OK. A dialog box appears with a warning that continuing will erase all settings.
7 Select Yes and press OK to continue setting factory defaults, or select No and press
OK to quit changing settings to factory defaults. If you choose to continue, the
HP DreamScreen will restart.
CAUTION: It takes several minutes to restore the HP DreamScreen to the
factory default settings. Do not unplug or attempt to stop the
HP DreamScreen until after it begins to play the introductory video.
8 Reconfigure your network and any other settings in Setup (see "Setup," "Network
setup — wired," and "Network setup — wireless" under "Menu Options").

Viewing tutorial videos

The HP DreamScreen comes with a series of preinstalled tutorial videos. These include:
Basic Setup
Load Photos and Music Videos
Connect to Network
Internet Services
PC Connection Setup
Copying Content from your PC Over a Home Network
Streaming Music and Photos
To view the tutorial videos (as well as any other video on the HP DreamScreen):
1 Select Video from the main menu and press OK.
2 Select the All Videos tab and press
3 Use the navigation controls to select the video of your choice and press OK.
The selected video plays.
NOTE: You can also view the setup tutorial videos at any time on a PC using the CD
provided with your HP DreamScreen.
10
HP DreamScreen User Guide
to select Setup from the main menu.
to select Factory Default.
.