Pioneer 1014TX-K - THX Select A/V Receiver Service Manual page 148

1
6 (TUNE/ST +/–) /ENTER
Use the arrow buttons when setting up your surround
A
sound system. Also used to control DVD menus/options
and for deck 1 of a double cassette deck player. Use
the TUNE +/– buttons to find radio frequencies and
use ST +/– to find preset stations.
7 TV CONTROL buttons
These buttons are dedicated to control the TV assigned to
the TV CONT button. Thus if you only have one TV to hook
up to this system assign it to the TV CONT MULTI
CONTROL button. If you have two TVs, assign the main
TV to the TV CONT button.
B
TV
Use to turn on/off the power of the TV.
TV VOL +/–
Use to adjust the volume on your TV.
INPUT SELECT
Use to select the TV input signal.
TV CH +/–
Use to select channels.
8 Component control buttons
C
The main buttons ( , , etc.) are used to control a
component after you have selected it using the MULTI
CONTROL buttons.
The controls above these buttons can be accessed after
you have selected the corresponding MULTI CONTROL
button (for example DVD/LD, DVR/VCR or TV/SAT
(when connected to a DTV)).
DTV ON/OFF
Switches a digital TV on/off.
DTV INFO
Use to bring up information screens on a digital TV.
D
TUNER DISPLAY
Switches between named station presets and radio
frequencies.
MPX
Switches between stereo and mono reception of FM
broadcasts. If the signal is weak then switching to
mono will improve the sound quality.
AUDIO
Changes the audio language or channel on DVD
discs.
E
CH RETURN
Returns to the last channel selected with DTV, SAT
and some TVs.
SUBTITLE
Displays/changes the subtitles included in
multilingual DVD-Video discs.
F
148
1
2
CH +/–
Use to select channels when using a TV, VCR, DVR,
etc.
The following DVR controls can be accessed by pressing
SHIFT :
ì REC
Starts recording.
REC STOP
Stops recording.
HDD/DVD
These buttons switch between the hard disk and DVD
controls for DVD/HDD recorders.
9 RECEIVER CONTROL buttons
THX
Press to select a Home THX listening mode
STANDARD
Press for Standard decoding and to switch between
the various Pro Logic IIx and Neo:6 options.
ADV. SURR
Use to switch between the various surround modes
STEREO
Switches between direct and stereo playback. Direct
playback bypasses the tone controls and any other
signal processing for the most accurate reproduction
of a source.
AUTO SURR
Press to have the receiver automatically detect what
kind of source you're playing and select multichannel
or stereo playback as necessary.
ACOUSTIC EQ
Press to select an Acoustic Calibration EQ setting
SIGNAL SELECT
Use to select an input signal.
MIDNIGHT/LOUDNESS
Use Midnight when listening to movie soundtracks at
low volume. Use Loudness to boost the bass and
treble at low volume.
EFFECT/CH SEL
Press repeatedly to select a channel, then use –/+ to
adjust the level . Also adjusts the level of the
Advanced Surround effects as well as
Dolby Pro Logic IIx Music and Neo:6 Music
parameters. You can then use the + and –
buttons to make these adjustments.
VSX-52TX
2
3
3
4
4