Display - Pioneer 1014TX-K - THX Select A/V Receiver Service Manual

5

8.2 DISPLAY

Display
1 2
SIGNAL
DIGITAL
AUTO ANALOG
SLEEP
SP A B SR
17 16
1 Speaker indicators
Lights to indicate the current speaker system, A and/or B.
2 SIGNAL SELECT indicators
Lights to indicate the type of input signal assigned for the
current component:
AUTO
Lights when AUTO signal select is on.
DIGITAL
Lights when a digital audio signal is detected.
ANALOG
Lights when an analog signal is detected.
3 Digital format indicators
2 DIGITAL
Lights when a Dolby Digital encoded signal is
detected.
DTS
Lights when a DTS encoded signal is detected.
4 Program format indicators
These change according to which channels are active in
Dolby, DTS, DVD-A and SACD sources.
LS, S and RS will light at the same time to indicate
6.1channel sources.
• L – Left front channel
• C – Center channel
• R – Right front channel
• LS – Left surround channel
• S – Surround channel (mono) or surround back
channel
• RS – Right surround channel
• LFE – Low frequency effects channel
5
6
3 4
DIGITAL L C R LFE
DTS L S R
S S
AUTO SURR. M ONO STEREO TUNED DE
6 15
6
7
5 6 7
eo
PL N 6 THX DVD
ADV.SURR. VIR.SB CD
MIDNIGHT LOUDNESS
14 13
5 Matrix decoding format indicators
2 PL II
This lights to indicate Pro Logic II / Pro Logic IIx
decoding.
Neo:6
When one of the Neo:6 modes of the receiver is on,
this lights to indicate Neo:6 processing.
6 Listening mode indicators
THX
Lights when one of the Home THX modes is selected.
VIR.SB
Lights during Virtual surround back processing.
ADV.SURR.
Lights when one of the Advanced Surround modes
has been selected.
AUTO SURR.
Lights when the Auto Surround feature is switched
on.
7 MIDNIGHT / LOUDNESS
When Midnight or Loudness listening is switched on, the
corresponding indicator shows in the display.
8 Input source indicators
Light to indicate the input source you have selected.
9 MULTI-ROOM
Lights when the multi-room feature is active.
10 ATT
Lights when INPUT ATT is used to attenuate (reduce) the
level of the analog input signal.
11 OVER
Lights to indicate that the level of an analog source is too
high. Use the attenuator (INPUT ATT) to reduce it.
VSX-52TX
7
8
8 9 10
T V DVR VIDEO1
CD - R
TUNER VIDEO2
MU LTI - ROOM ATT
OVER
dB
12 11
8
A
B
C
D
E
F
145