Setting A Rescue Device In The Startup Sequence; Solving Recovery Problems - Lenovo 6136A1U User Manual

Setting a rescue device in the startup sequence

Before you start the Rescue and Recovery program from a CD, DVD, USB hard
disk drive, or any external device, you must first change the startup sequence in
the Setup Utility.
To view or change the startup sequence, do the following:
1. With the computer turned off, repeatedly press and release the F1 key while
2. When the logo screen appears, or you hear a series of beeps, release the F1 key.
3. If you are prompted for a password, type your current password.
4. From the Setup Utility main menu, use the right-arrow key to select Startup.
5. Arrange the startup sequence to meet your needs.
6. Press the Esc key twice to go to the Setup Utility exit menu.
7. Use the down-arrow key to select Save and exit the Setup Utility, then press
8. When the Setup Confirmation window appears, press Enter.
9. The computer restarts.
Note: If you are using an external device, you first must turn off your computer
For more information on Setup Utility, see Chapter 4, "Using the Setup Utility," on
page 43.

Solving recovery problems

If you are unable to access the Rescue and Recovery workspace or the Windows
environment, you can:
v Use your rescue media (CD, DVD, or USB hard disk drive) to start the Rescue
v Use a Recovery Repair diskette to repair the Rescue and Recovery workspace or
v Use a set of Product Recovery discs if you want to restore the hard disk drive to
It is important to create a Recovery Repair diskette, rescue media, and a set of
Product Recovery discs as soon as possible and store them in a safe place.
If you are unable to access the Rescue and Recovery workspace or the Windows
environment from rescue media, a Recovery Repair diskette, or a set of Product
Recovery discs, you might not have the rescue device, CD drive, DVD drive, or
USB hard disk drive defined as a startup device in the BIOS startup sequence. For
more information, see "Setting a rescue device in the startup sequence."
you turn on the computer.
Enter.
before connecting the external device.
and Recovery workspace. See "Creating and using rescue media" on page 38 for
details.
repair a file needed to enter the Windows environment. See "Creating and using
a Recovery Repair diskette" on page 39 for details.
its original factory state. See "Creating and using Product Recovery discs" on
page 35.
Chapter 3. Recovery information
41