Beep Codes
Your computer might emit a series of beeps
during start-up if there are errors or problems.
This series of beeps, called a beep code,
identifies a problem. If this occurs, write
down the beep code and contact Dell
"Contacting Dell" on page 69) for assistance.
NOTE: To replace parts, see the Service
Manual at support.dell.com/manuals.
Beep Code
One
Two
(see
™
Three
Four
Five
Six
Solving Problems
Possible Problem
Possible system board failure —
BIOS ROM checksum failure
No RAM detected
NOTE: If you installed or
replaced the memory module,
ensure that the memory module
is seated properly.
Possible system board failure —
Chipset error
RAM read/write failure
Real Time Clock failure
Video card or chip failure
41