Informations Du Fabricant Relatives Au Recylage Et Aux Économies D'énergie - NEC MultiSync LCD2080UXi User Manual

Tag4 Auto
(Analog input only)
H. Position
V. Position
H. Size
(Analog input only)
Fine
(Analog input only)
Tag5 Black Level
(Analog input only)
Tag6 Color Control
Automatically adjusts the Image Position and H. Size settings and Fine settings.
Press "SELECT" to activate Auto Adjustment.
Controls Horizontal Image Position within the display area of the LCD.
Press "+" or "-" to adjust.
Controls Vertical Image Position within the display area of the LCD.
Press "+" or "-" to adjust.
Adjusts the horizontal size of the screen.
If the "AUTO Adjust function" do not give you a satisfactory picture setting, a further
tuning can be performed using the "H.Size" function (dot clock). For this a Moiré test
pattern could be used. This function may alter the width of the picture. Use left/Right
Menu to center the image on the screen. If the H.Size is wrongly calibrated, the result
would look like on the left drawing. The image should be homogeneous.
When H.SIZE value is wrong. When H.SIZE value is improved. When H.SIZE value is correct.
Improve focus, clarity and image stability by increasing or decreasing this setting.
If the "Auto Adjust function" and the "H.Size" function do not give you a satisfactory
picture setting, a fine tuning can be performed using the "Fine" function. It improves focus,
clearity and image stability by increasing or decreasing this setting. For this a Moiré test
pattern could be used. If the Fine value is wrongly calibrated, the result would look like on
the left drawing. The image should be homogeneous.
When FINE value is wrong.
Adjusts the black level. Press "+" or "-" to select.
MANUAL allows you to manually adjust the black level. Press "+" or "-" to adjust.
AUTO automatically adjusts the black level. Ensure that the image has 64 or more
adjacent black dots before making an adjustment. Press "SELECT" to activate Auto Adjust.
Six colours for the desired colour setting (sRGB and NATIVE colour presets cannot
be changed).
Colour temperature increases or decreases in each preset. Press "
colour. Press "+" or "-" to adjust. Press "SELECT" to customize.
R,Y,G,C,B,M,S
Increases or decreases Red, Yellow, Green, Cyan, Blue, Magenta and Saturation
depending upon which is selected. The change in colour will appear on screen and the
direction (increase or decrease) will be shown by the colour bars. Press "+" or "-" to adjust.
NATIVE
Original colour presented by the LCD panel that is not adjustable.
English-16
1-49
When FINE value is correct.
" or " " to select