HP XP598AA#ABA User Manual page 29

Icon
ENWW
Main Menu Options
Language
Information
Factory Reset
Source Control
Sub-menu Options
Sleep Timer
Current Settings
Recommended Settings
Serial Number
FW Version
Backlight Hours
Service Support
DVI (select models)
HDMI (select models)
VGA
Default Source
Using the On-Screen Display (OSD)
Description
Provides the timer-adjustment menu
options:
●
Set Current Time — Sets the
current time in hours and minutes.
●
Set Sleep Time — Sets the time
you want to place the monitor in
sleep mode.
●
Set On Time — Sets the time you
want the monitor to wake up from
sleep mode.
●
Timer — Sets the Sleep Timer
feature on or off; the default setting
is Off.
●
Sleep Now — Immediately sets the
monitor to enter sleep mode.
Selects the language in which the OSD
menu is displayed. The factory default is
English.
Selects and displays important
information about the monitor.
Provides the current input video mode.
Provides the recommended resolution
mode and refresh rate for the monitor.
Reports the serial number of the
monitor. The serial number is needed if
contacting HP technical support.
Reports the firmware version of the
monitor.
Reports the total hours of backlight
operation.
For service support, go to: www.hp.com/
support.
Returns settings to factory defaults.
Selects the video input signal. The
factory default by priority is DVI, VGA,
and then HDMI.
Selects DVI as the video input signal.
Selects HDMI as the video input signal.
Selects VGA as the video input signal.
Selects the default or primary video
input signal when the monitor is
connected to two active and valid video
sources. The monitor will automatically
determine the video format.
23