HP LE19f - Widescreen LCD Monitor User Manual page 27

Table 4-2 OSD Menu (continued)
Icon
ENWW
Main Menu Submenu
Sleep Timer
Video Input
Control (select
models)
Switch Video Input
Auto-Switch Input
Default Video Input
Information
Current Settings
Recommended
Settings
Serial Number
Version
Backlight Hours
Service Support: http://
www.hp.com/support
Factory Reset
Exit
Description
Provides the timer adjustment menu options:
●
Set Current Time—sets the current time in hours
and minutes
●
Set Sleep Time—sets the time you want to place
the monitor in sleep mode
●
Set on Time—sets the time you want the monitor
to wake up from sleep mode
● Timer—sets the Sleep Timer feature On or Off.
The default setting is Off.
●
Sleep Now—immediately sets the monitor to
enter sleep mode
Selects the video input signal. DVI is the factory
default.
Selects the other (VGA or DVI) video input signal.
Default is DVI.
Turns the system's automatic video signal input to on
or off. The factory default is On.
Selects the default or primary video input signal when
the monitor is connected to two active and valid video
sources. The monitor will automatically determine the
video format. The default input selection is DVI.
Analog — VGA — Selects VGA input.
Digital — DVI — Selects DVI input.
Selects and displays important information about the
monitor.
Provides the current input video mode.
Provides the recommended resolution mode and
refresh rate for the monitor.
Reports the serial number of the monitor. The serial
number is needed if contacting HP technical support.
Reports the firmware version of the monitor.
Reports the total hours of backlight operation.
Returns all OSD menu settings and DDC/CI controls
to the factory default settings, except the Language.
Exits the OSD menu screen.
Adjusting the Monitor Settings 19