HP LE1851w - Widescreen LCD Monitor User Manual page 18

4. To attach the monitor to a swing arm, insert four 10mm screws through the holes on the swing arm
plate and into the mounting holes on the monitor.
Figure 3-8
To attach the monitor to other mounting fixtures, follow the instructions included with the mounting
fixture to ensure that the monitor is safely attached.
CAUTION:
a third-party mounting solution to the monitor, four 4 mm, 0.7 pitch, and 10 mm long screws are
required. Longer screws must not be used because they may damage the monitor. It is important
to verify that the manufacturer's mounting solution is compliant with the VESA standard and is rated
to support the weight of the monitor display panel. For best performance, it is important to use the
power and video cables provided with the monitor.
5. Reconnect the cables to the monitor panel.
10 Chapter 3 Setting Up the Monitor
Installing the Monitor on a Swing Arm
This monitor supports the VESA industry standard 100 mm mounting holes. To attach
ENWW