Pioneer DVR-XD10 Operating Instructions Manual page 9

Connection
This is a hot-plug unit. Connect the unit to the supplied USB cable.
1 Confirm that your computer (PC) has two available USB ports.
2 With your Windows® operating system running, use the supplied USB cable to connect this unit
to the PC.
Caution
• Do not disconnect the USB cable during data transfers.
• Do not disconnect the USB cable during the PC start nor any operation with the unit.
Computer
(PC)
Note
• This unit can operate with USB 1.1 but will not provide optimum performance.
• Connecting this unit through a USB HUB or using unspecified cables may not guarantee proper
operation.
• In some cases, the use of a single USB port may be insufficient for normal operation.
Use two USB ports for power enhancement.
• If power is insufficient when using two USB ports, connect an AC adapter (not included) through
the DC IN connector on the unit's rear panel and plug into a wall outlet to deliver power. Connect
the USB cable (included) after connecting the AC adapter for proper operation. For more details
about the AC adapter connection, visit
www.pioneerelectronics.com/PUSA/Support/BusinessProducts/Blu-rayDisc+DVDWriters
• Do not connect any AC adapter other than specified by Pioneer.
• This DVD/CD WRITER is for use only with compatible UL Listed personal computers that have
Installation Instructions detailing user installation of USB accessories.
• UL Listed, Class 2 AC Adapter (Output 5 V, min. 1.0 A) shall be used.
This unit
USB cable (supplied)
DC IN
5V
9
En