Step 3: Turn The Camera On; Step 4: Choose The Camera Language - HP Photosmart 318 User Manual

Step 3: Turn the camera on

To turn the camera on, slide the
switch to the right and release it. The status LCD (liquid crystal
display) on top of the camera turns on and displays the camera
status.
Note
To turn the camera off, slide the
again and release it. The status LCD shuts off and goes blank.

Step 4: Choose the camera language

The first time you turn the camera
on, it prompts you to choose the
language you want to use for the
camera menus.
1 Turn the
scroll to the language you want to
use.
2 Press the
If you chose the wrong language, you can change it by using
the Setup menu.
4
The icons that appear on the status LCD are
discussed throughout this guide. For more
information, see "Appendix A: Reference" on
page 69.
( ) dial to
CONTROL
dial to select the language.
/
ON OFF POWER
switch to the right
HP photosmart 318 User Guide
( )