Removing The Front Bezel; Replacing The Power Supply - Lenovo 410554U Hardware Maintenance Manual

User manual
Hide thumbs Also See for 410554U:
Table of Contents

Advertisement

Removing the front bezel

To remove the front bezel:
1. Remove the cover. See "Removing the cover" on page 76.
2. Remove the front bezel by releasing the three plastic tabs
outward.
3. Lay the front bezel on a flat surface.
4. To reinstall the bezel, align the plastic tabs on the right side of the bezel with the corresponding holes in
the chassis, then pivot the bezel inward until it snaps into position on the left side.

Replacing the power supply

Attention
Never remove the cover on a power supply or any part that has the following label attached.
Hazardous voltage, current, and energy levels are present inside any component that has this label attached.
There are no servicable parts inside these components.
112
ThinkStation Hardware Maintenance Manual
1
on the left side and pivoting the bezel

Advertisement

Table of Contents
loading

Table of Contents