Checking The Accessory Kit; Product Installation - Eaton 9130 User Manual

2. Installation
2.3

Checking the Accessory Kit

Verify that the following additional items are included with the UPS:
UPS user's guide
Software Suite CD
USB cable
RS232 cable
Figure 3. UPS Accessory kit.
If you ordered an optional Extended Battery Module (EBM), verify that the following additional item is
included with the EBM:
EBM user's guide
Power cable
Figure 4. EBM Accessory kit.
Discard the EBM user's guide if you are installing the EBM with a new UPS at the same time.
Use the UPS user's guide to install both the UPS and the EBM.
2.4

Product Installation

The cabinet is heavy (see page 31). Removing the cabinet from its carton requires a minimum
of two people.
To install the cabinet:
1. Place the UPS on a flat, stable surface in its final location.
2. Always keep 150mm of free space behind the UPS rear panel.
3. If installing additional cabinets, place them next to the UPS in their final location.
Page 6
Copyright © 2009 EATON
All rights reserved.
8609 6 Forks Road EATON
Raleigh, NC 27615 U.S.A.
Toll Free: 1.800.356.5794 or 919.872.3020
Service and support:
United States: 1-800-843-9433 or 1-919-870-3028
Canada: 1-800-461-9166 ext 260
All other countries: Call your local service representative
E-mail: InsideSalesEngineerUPS@eaton.com
EATON 9130 UPS
5000 - 6000 VA
User's guide
9130 UPS-EN
9130 UPS-EN