Replacing the PCI-Express x1 Card(s)
1 Place the PCI-Express x1 card in the slot on the system board and press
down firmly. Ensure that the PCI-Express x1 card is fully seated in the slot.
1
PCI-Express x1 card slot
2 Replace the card-retention bracket, ensuring that:
•
The guide clamp is aligned with the guide notch.
•
The top of all cards and filler brackets are flush with the alignment bar.
•
The notch on top of the card or filler bracket fits around the
alignment guide.
3 Replace the screw that secures the card-retention bracket.
46
PCI-Express x1 Card(s)
1
2
PCI-Express x1 card
2