Removing the Power Connector
1.
Follow the procedures in
2.
Remove:
a) access panel
b) keyboard
c) palmrest
d) battery
e) display hinge cover
f) display assembly
g) fan
h) system board
3.
Remove the screw that secures the power connector to the computer and remove the power connector from the
computer.
Installing the Power Connector
1.
Tighten the screw to secure the power connector to the computer.
2.
Install :
a) system board
b) fan
c) display assembly
d) display hinge cover
e) battery
f) palmrest
g) keyboard
h) access panel
3.
Follow the procedures in
Removing the Input/Output (I/O) board
1.
Follow the procedures in
2.
Remove:
a) access panel
b) keyboard
c) palmrest
d) battery
3.
Disconnect the speaker cable and the I/O-board cable from the I/O board.
34
Before Working Inside Your Computer .
After Working Inside Your Computer .
Before Working Inside Your Computer .