safety instructions in the
grounding strap or by periodically touching an unpainted metal surface (such as a
connector on the back of the computer).
battery bay before you begin working inside the computer.
Removing the Coin-Cell Battery
1 Follow the procedures in "Before You Begin" on page 161.
2 Turn the computer over.
3 Loosen the captive screw on the memory module/coin-cell battery cover
(see "Bottom View" on page 34), and remove the cover.
4 Disconnect the coin-cell battery cable from the system board.
Adding and Replacing Parts
Before you begin any of the procedures in this section, follow the
Product Information Guide
To avoid electrostatic discharge, ground yourself by using a wrist
To help prevent damage to the system board, remove the battery from the