Table of Contents
Advertisement
Available languages
Available languages
iTunes Tagging
You can save the name of a song broadcast from
a SiriusXM channel to this unit with a few easy
steps. For details, see “iTunes Tagging”
(page 18).
Parental control
Some SiriusXM channels contain content that is
not suitable for children. You can enable a
parental control passcode for these channels.
1
On the Source Settings (page 56),
move the scrollbar up and down to
select “SXM Parental Control.”
2
Enter the passcode, then touch “OK.”
To unblock the channels, enter the passcode.
Changing the passcode
1
Select “SXM Parental Control” on the
Source Settings, then enter your
current passcode to unlock the
parental control.
2
Select “SXM Parental Control” on the
Source Settings again, then enter new
passcode.
Displaying the SiriusXM Radio ID
1
During playback, touch
.
2
Enter “000,” then touch “OK.”
Rear view camera
By connecting the optional rear view camera to
the CAMERA terminal, you can display the
picture from the rear view camera.
The picture from the rear view camera appears
when:
– the back lamp lights up (or the shift lever is set
to the R (reverse) position).
– you press (HOME) then touch “Rear
Camera.”*
– you press (DSPL) repeatedly.*
* The marker lines you edit in Rear view camera
settings do not appear.
Note
When backing up your car, watch the surroundings
carefully for safety. Do not depend on the rear view
camera exclusively.
Tip
Even if a rear view camera is connected, you can set
the unit to not display the picture from a rear view
camera by deactivating the camera input (page 52).
Rear view camera settings
You can display setting items on the picture from
the rear view camera to assist operation.
This setting is available only when:
– “Camera Input” is set to “Normal” or
“Reverse” (page 52).
– the parking brake is applied.
1
Press (HOME), then touch “Settings.”
2
Touch
.
3
Move the scrollbar up and down, then
touch “Rear View Camera Setting.”
The setting items appear.
Displaying marker lines
Touch
.
Touch
again to hide the marker lines.
Editing lines
1 Touch
.
2 Select the line to edit.
Touch
,
or
corresponding to the line to edit.
3 Edit the line.
To increase the length, touch B b.
To reduce the length, touch bB.
To adjust the position, touch V or v.
To restore the default setting, touch “Reset.”
To return to the previous display, touch
.
Page 59
- Quick Links:
- Notes on Installation
- Resetting the Unit
Hide quick links:
Advertisement
Chapters
Table of Contents
