Sony RDP-XA900IP Operating Instructions Manual page 12

Rear
A WPS button
Use to connect the unit to your Wi-Fi
network, refer to the supplied "AirPlay via
Wi-Fi Network Setup" for details.
B LAN port
Connect a network (LAN) cable (not
supplied, page 11).
C RESET (NETWORK) button
Press and hold to reset the network settings
(the ?/1 indicator starts flashing).
Use a thin object, such as a small pin.
Note
Settings other than network settings, including
Bluetooth pairing information, are not reset.
D AUDIO IN terminals
DIGITAL (OPT): Connect to the digital
(optical) output jack of an external
component (page 20).
ANALOG: Connect to the analog (stereo)
output jack of an external component
(page 20).
E VIDEO OUT terminal
Use to display videos from the iPod on the
Docking Tray (page 15).
8
GB
F AC IN terminal
Connect the supplied AC power cord
(page 10).