Table of Contents
Advertisement
The LCD screen of your camcorder can display recording images across the entire screen (full pixel
display). However, this may cause slight trimming of the top, bottom, right, and left edges of images when
played back on a TV which is not compatible with full pixel display. In the case of 2D recording, it is
recommended you record images with [Guide Frame] set to [On] and using the outer frame of the guide
frame (p. 71) as a guide.
Recording time, recordable number of photos (p. 78)
[Media Select] (p. 25)
[Flash] (p. 71)
To display items on the LCD screen all the time: [Display Setting] (p. 71)
To change the image size: [
Recordable time, remaining capacity [Media Info] (p. 72)
Zooming
Move the power zoom lever to
magnify or reduce the size of the
image.
W (Wide angle): Wider range of view
T (Telephoto): Close view
You can magnify images as follows.
3D recording: Up to 12 times the original size
(Extended Zoom)
2D recording: Up to 17 times the original size
(Extended Zoom)
Move the power zoom lever slightly for a slower
zoom. Move it further for a faster zoom.
Image Size] (p. 43)
GB
1
Advertisement
Table of Contents
