Using A Pc Card Adapter; Copyrights - Sharp VN-EZ1U Owner's Manual

Using a PC Card Adapter

1
Remove the SmartMedia card
from the VN-EZ1.
When doing so, be careful not
to drop the battery.
2
Insert the SmartMedia card
properly into the adapter, as
shown on the diagram.
Insert with the mark on the
adapter and the contact sur-
face of the SmartMedia card on
the top.
The eject button pops out.
The SmartMedia card will not operate if it is not completely inserted.
notice
The SmartMedia card will not operate if it is inserted upside-down.
3
Insert the PC card adapter into
the computer's PC card slot.

Copyrights

The "Readme.txt" file on the root directory of the "PixLab Media Browser Installation
CD-ROM" includes important new information that could not be included in this on-
line manual.
Microsoft and Windows are registered trademarks or trademarks of Microsoft Cor-
poration in the United States and other countries.
DirectX is a trademark of Microsoft Corporation of the United States and is copy-
righted.
Acrobat and Acrobat Reader are registered trademarks or trademarks of Adobe
Systems Incorporated.
SmartMedia is a trademark of Toshiba Corporation.
Other names of corporations and products are trademarks or registered trademarks
of the respective corporations.
The contents of the on-line manual and installation guide have been prepared with
care. If, however, you should have any doubts or notice any errors, please contact
SHARP Corporation.
PixLab (hereafter referred to as "this software") is copyrighted by SHARP Corpora-
tion. Copyrights and other rights concerning PixLab belong to SHARP Corporation.
The contents of the on-line manual and installation guide may not be reproduced in
part or in whole. They are for personal use only, and as per copyright laws may not
be used without the permission of SHARP Corporation.
Please note that SHARP Corporation will accept no responsibility for damages,
loss of income or claims by third parties resulting from the use of this software.
Please note that the specifications of this software and the contents of the on-line
manual and installation guide are subject to change without prior notice.
Operation may be slow depending on the computer's operating environment and
processing capabilities.
The descriptions in this on-line manual may not correspond exactly to your computer's
environment.
Images or recordings you make on the MPEG-4 digital recorder may be used for
your personal enjoyment only. They may not be used without the permission of the
copyright holder per copyright laws. Also note that the use of certain performances,
shows, exhibitions, etc., though intended for personal enjoyment, may be restricted.
The software is based on modules developed by the Independent JPEG Group.
6