Using Your Dishwasher; Control Panel - Samsung DW7933LRASR/AA User Manual

Using your dishwasher

CONTROL PANEL

DW7933 Series
1 3
PROGRESS
1
LIGHT
DISPLAY
2
CYCLE
3
SELECTOR
CANCEL &
4
DRAIN
SANITIZE
5
CHILD LOCK/
6
UNLOCK
DW7933LRASR-00141A-01_EN_20120514.indd 9 DW7933LRASR-00141A-01_EN_20120514.indd 9
4
Progress information (Wash, Dry, Clean)
Each progress light corresponding to the current operation turns on to show
the progress of the cycle.
Displays information (Low Rinse, Child Lock).
The "Low Rinse" light turns on when you need to refi ll the rinse aid agent and
the "Child Lock" light turns on/off when you activate the Child Lock/Unlock.
Select the appropriate wash cycle depending on the soil level of your dishes.
After you select a cycle, the Cycle On light for that cycle lights up. If you want
to cancel the selected cycle, press the selected cycle button again. If an error
occurs during an operation, an error message is illuminated with a warning
sound. Refer to the "Information codes" on page 26.
To cancel a cycle currently running and drain the dishwasher, hold down both
the Heavy and Quick + buttons for three (3) seconds.
When you use the Sanitize option, the temperature rises to 162 ˚F (72 ˚C) in the
fi nal rinse cycle for high temperature sanitization.
If you select the Sanitize option, the "Sanitize" lamp blinks when the water
temperature reaches the sanitary temperature (over 155 ˚F (68 ˚C)), and then
remains illuminated until the Sanitize option ends. When you open the door or
press the Power button, the "Sanitize" lamp turns off .
The Sanitize feature is in accordance with NSF/ANSI Standard 184
for Residential Dishwashers. Certifi ed residential dishwashers are not
intended for licensed food establishments. Your dishwasher is NSF
Certifi ed.
The cycle that is NSF certifi ed is the Heavy Cycle with the sanitize option
selected.
This option allows you to lock the buttons on the control panel so children
cannot accidently start the dishwasher by pressing the buttons on the panel.
To lock and unlock the buttons on the control panel, hold the Sanitize button
down for three (3) seconds.
- When Power is On : Hold down the Sanitize button for three (3) seconds.
- When Power is Off : Push the Power button fi rst, and then hold down the
Sanitize button for three (3) seconds.
6 5 2 7
Using your dishwasher _9
2012-05-14 2012-05-14
8
4:46:48 4:46:48