Samsung XE700T1C User Manual page 80

Using the TPM Security Device
When the virtual drive (PSD) is not loaded
To use the virtual drive (PSD), the virtual drive (PSD) should be
loaded first. If it is not loaded, you can load it according to the
procedures below.
1
Right-click over the Security Platform
tray of the Taskbar and select Personal Secure Drive > Load
from the pop-up menu.
2
In the load window, enter the basic user password and click
OK.
3
If you click on Windows Explorer in the Taskbar on the
Desktop screen, you can confirm that the Personal Secure
Drive has been created.
Note that when you have copied confidential data to the PSD,
the original data files are not encrypted.
(Optional)
When you have to register again (to erase the
authentication information on the TPM chip)
To register a user again, you need to delete the existing
authentication information saved on the TPM chip and then clear
the TPM chip.
icon in the system
Register the user in the following order.
1
2
Delete the virtual drive.
Delete the existing authentication information saved on the
TPM chip.
Chapter 3.
79
Using the computer