Samsung UN60ES7500F Quick Manual page 20

8
Clock: Set the
Clock.
9
Voice and Motion
Control: Setting the
Voice and Motion
Control function.
10
Setup: Complete
11
Set the Universal
Remote.
If You Want to Rerun Setup...
Menu → System → Setup
If You Want to Turn the Store Demo Mode On or Off.
To set or unset Store Demo mode outside of Setup, press and release the Controller when the power is
on. The Function menu screen appears. Push the Controller to the left (to MENU (m)) and hold for more
than 5 seconds. The Store Demo mode is set. To cancel Store Demo, bring up the Function menu using
the Controller, push the Controller to the right (to Source (s)) and hold for more than 5 seconds. See
page 12 for information about the Controller.
Select Auto or Manual, and then select Next.
If you selected No, I don't need to. in 5 - Auto Program (1), you can
✎
only set the current time and date manually, using your remote.
Auto
If you selected Auto, the TV will automatically download the correct time
from a digital channel. The Time Zone screen will appear. Select your
Time Zone, and then select Next. The DST (Daylight Savings Time)
screen will appear. The DST function sets the time ahead one hour to
adjust the clock for Daylight Savings Time. Select On if you want to turn
the DST adjustment on. Select Off to turn off the DST adjustment. You
can also turn the DST function on through the TV's on screen menu
(Menu → System → Time → Clock → DST).
Manual
If you selected Manual, you'll go to the Clock screen. Select Date or
Time. You can set the current date and time using your remote. When
done setting the Date and Time, select Next.
You can turn the Voice and Motion Control function on or off. Select Off
or On, and then select Next.
Review the Setup data, and then select Close to finish.
The completed settings are displayed.
✎
1. Turn on the POWER
press the PAIRING button.
2. Select Yes to start the Universal Remote Setup.
For more detailed information about the Universal Remote Setup,
✎
refer to "Setting up the Universal Remote Control" section in the
manual (page 46).
English - 20
button on the bottom of the IR Blaster, and then