Ipv6 Configuration; Activating Ipv6 - Samsung CLP-360 User Manual

Clp-360 colour laser printer
Hide thumbs Also See for CLP-360:
Table of Contents

Advertisement

IPv6 configuration

IPv6 is supported properly only in Windows Vista or higher.
If the IPv6 network seems to not be working, set all the network setting to
the factory defaults and try again using Clear Setting.
In the IPv6 network environment, follow the next procedure to use the IPv6
address.
9
From the control panel
1
Connect your machine to the network with a network cable.
2
Turn on the machine.
3
Print a Network Configuration Report that will check IPv6 addresses
(see "Printing a network configuration report" on page 9).
Select Start > Control Panel > Printers and Faxes.
4
Click Add a printer in the left pane of the Printers and Faxes windows.
5
6
Click Add a local printer in the Add Printer windows.
7
The Add Printer Wizard window appears. Follow the instructions in the
window.
If the machine does not work in the network environment, activate IPv6.
Refer to the next section followed by.

Activating IPv6

1
Press the
(Menu) button on the control panel.
2
Press Network > TCP/IP (IPv6) > IPv6 Activate.
3
Select On and press OK.
4
Turn the machine off and turn it on again.
5
Reinstall your printer driver.
2. Using a network-connected machine
18

Advertisement

Table of Contents
loading

This manual is also suitable for:

Clp-365wClp-365Clp-36 seriesClp-36xw series

Table of Contents