Table of Contents
Advertisement
Parts List
Unpack the NP30UCM Mount and familiarize yourself with the components. Before proceeding, the collar assembly must be
separated (please refer to Disconnecting the Collar Assembly, page 10). Please take time before you install the NP30UCM to
determine the location of where the NP30UCM will be mounted. Please familiarize yourself with all components contained herein.
NP30UCM Mount (Qty 1)
M5 x 12mm Security Screw (Qty 4)
M2.5 X 8mm Security Screw (Qty 4)
Plastic Barrel Caps (Qty 4)
Installation Tools
Ladder
Flat Tip
Screwdrivers
Installation Manual
Please review all WARNING and CAUTION statements (see Page 2) before beginning the installation of
the NP30UCM.
M4 x 12mm Security Screw (Qty 4)
¼ – 20 x 5/16" Security Screw (Qty 1)
Wood Drill Bit
Phillips Head
Mounting Legs (Qty 4)
#14 x 2" Wood Screws (Qty 2)
Drill
Tape Measure
M6 x 12mm Security Screw (Qty 8)
M3 x 16mm Security Screw (Qty 4)
M3 Flat Washers (Qty 20)
M5 Security Allen Wrench –Supplied
(Qty 1)
Pencil
Concrete Drill Bit
Page - 3 -
Advertisement
Table of Contents
