• Before cleaning the washer interior, unplug the electrical power cord to avoid electrical
• Turn off the stopcock if the machine is to be left for any length of time (e.g. holiday),
especially if there is no floor drain(gully) in the immediate vicinity.
The water inlet filter
" icon will be displayed on the control panel when water does not enter the
• If water is very hard or contains traces of lime deposit, the water inlet filter may become
It is therefore a good idea to clean it from time to time.
1. Turn off the water tap.
2. Unscrew the water inlet hose.
3. Clean the filter using a hard bristle brush.
4. Tighten up the inlet hose.