BASIC CONTROLS
SETTING THE CLOCK
The clock display will flash to indicate that the time shown is not correct. To set
the clock, proceed as follows:
1. Select the Clock Symbol with the
Parameter selection keys (not
necessary if your microwave oven
is first plugged in or after a power
failure) "3".
Set the hours with Plus and Minus
2.
keys
HIDING/DISPLAYING THE CLOCK
If the clock display disturbs you, you can hide it by proceeding as follows:
1. Press and hold the Confirmation
key "
will be hidden but the dots between
the hours and the minutes will flash
once per second.
"4".
" for 3 seconds. The clock
1
Confirm the selection with the
3.
Confirmation key
4. Set the minutes with the Plus and
Minus keys "
".
4
5. Confirm the selection with the
Confirmation key "
2. To show the clock again, repeat
the described procedure again.
ENGLISH 9
"1".
".
1