Using Your Microphone System - Dynex DX-M1114 User Manual

Using your microphone system

5 Open the battery compartment, install two AA batteries
into the battery compartment, then close the
compartment. Make sure that the + and – symbols on the
batteries align with the + and – symbols inside the battery
compartment.
6 Slide the power switch to the ON position. The POWER
indicator lights.
To install the microphone battery:
1 Unscrew the battery cover.
2 Insert the 9 V battery into the battery compartment. Make
sure that the + and – symbols on the battery align with
the + and – symbols inside the battery compartment.
3 Slide the cover to close the compartment.
Using your microphone system
To use your microphone system:
1 Turn on the receiver.
2 Turn on the microphone.
3 Adjust the volume on the amplifier, if necessary.
7