Setting Up An Ftp Site - Asus WL-500gP V2 User Manual

Setting up an FTP site

The ASUS Wireless Router enables you to share files from your USB storage
device with computers in LAN through the Internet.
Notes:
• To use this feature, you need to insert a USB storage device, such as a USB hard disk or USB
flash drive, to the USB2.0 port on the rear panel of your wireless router. Ensure that the USB
storage device is formatted and partitioned properly.
• To access the FTP, you may either enable the DDNS service or key in the ftp link
ftp://192.168.1.1 from any computer in LAN.
To set up an FTP site:
1. Click Advanced Setting > USB Application from the navigation menu at the
left side of your screen.
. From the FTP Share tab, select the account that you want to assign access
rights to.
3. From the list of files, select the type of access rights that you want to assign for
specific files:
R/W: Select this option to assign read/write access for a specific file.
•
• W: Select this option to assign write only access for a specific file.
• R: Select this option to assign read only access for a specific file.
• No: Select this option if you do not want to share a specific file.
4. Click Apply to apply the changes.
5. From any LAN computer, key in ftp://192.168.1.1 on a web browser.
34
WL-500gP V2 Chapter 4: Configuring via the web GUI