Dell Latitude X300 Service Manual page 50

Hinge Covers and Display Assembly: Dell Latitude X300 Service Manual
1 M2 x 6-mm screws (2)
5. Remove the two M2 x 6-mm screws near the display hinges on the top of the
computer.
6. Disconnect both the antenna connectors.
NOTICE: Do not pull on the signal cable. Pull the signal connector to disconnect
the cables.
7. Disconnect the signal cable from the system board.
8. If a tape secures the signal connector, remove it and disconnect the signal cable
from the system board.
file:///F|/Service%20Manuals/Dell/Latitude/x300/display.htm (5 of 7) [2/28/2004 8:26:33 AM]
8T707