Download Print this page

Solving Problems; Beep Codes; Troubleshooting - Dell Inspiron N5030 Setup Manual

Setup guide
Hide thumbs

Advertisement

Solving Problems

This section provides troubleshooting
information for your computer. If you cannot
solve your problem using the following
guidelines, see "Using Support Tools" on
page 47 or "Contacting Dell" on page 70.

Beep Codes

Your computer might emit a series of beeps
during start‑up if there are errors or problems.
This series of beeps, called a beep code,
identifies a problem. If this occurs, write
down the beep code and contact Dell (see
"Contacting Dell" on page 70).
NOTE: To replace parts, see the Service
Manual at support.dell.com/manuals.
Beep Code
Possible Problem
One
Possible system board failure —
BIOS ROM checksum failure
Two
No RAM detected
NOTE: If you installed or
replaced the memory module,
ensure that the memory module
is seated properly.
Three
Possible system board failure —
Chipset error
Four
RAM read/write failure
Five
Real Time Clock failure
Six
Video card or chip failure
Seven
Processor failure
Eight
Display failure
41

Hide quick links:

Advertisement

loading

  Also See for Dell Inspiron N5030

  Related Manuals for Dell Inspiron N5030

This manual is also suitable for:

Inspiron n5020Inspiron m5030