Replacing the Daughter Board
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 7. After working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 9. For additional safety best practices
information, see the Regulatory Compliance Homepage at dell.com/
regulatory_compliance.
Procedure
1
Align the screw hole on the daughter board with the screw hole on
the computer base.
2
Replace the screw that secures the daughter board to computer base.
3
Connect the daughter-board cable to the daughter board.
Postrequisites
1
Replace the battery. See "Replacing the Battery" on page 35.
2
Replace the palm-rest. See "Replacing the Palm-Rest" on page 31.
3
Replace the keyboard. See "Replacing the Keyboard" on page 25.
4
Replace the optical-drive assembly. See "Replacing the Optical-Drive Assembly" on
page 19.
5
Follow the instructions from step 3 and step 4 in "Replacing the Memory Module(s)"
on page 15.
6
Follow the instructions in "After Working Inside Your Computer" on page 9.
Replacing the Daughter Board
47
|