1
coin-cell-battery
Replacing the Coin-Cell Battery
1 Follow the instructions in "Before You Begin" on page 7.
2 Adhere the coin-cell battery to the system board.
3 Connect the coin-cell battery cable to the system-board connector.
4 Replace the battery (see "Replacing the Battery" on page 16).
5 Replace the base cover (see "Replacing the Base Cover" on page 12).
CAUTION:
stray screws remain inside the computer. Failure to do so may result in damage to
the computer.
30
Coin-Cell Battery
Before turning on the computer, replace all screws and ensure that no
2
coin-cell battery cable
2
1