The Printer Does Not Print; The Radio Connection To A Network Does Not Work; Acoustic Warnings; Error Messages On The Screen - Fujitsu A9Z111E1014A2001 Operating Manual

The printer does not print

Printer doesnotprint
Cause
The printer is not switched on.
The printer is not connected correctly.
The printer driver is faulty or not correctly
installed, or it is the wrong printer driver.

The radio connection to a network does not work

Theradioconnectiontoanetwork does notwork
Cause
The wireless component is disabled.
The wireless component is enabled. Despite
this, the wireless connection to a network does
not work.

Acoustic warnings

Error message: Acoustic warnings
Cause
A beep sounds every few seconds
The battery is almost flat.

Error messages on the screen

Error messages onthescreen Error message:
This section describes the error messages generated by the BIOS Setup. Error messages displayed
by the operating system or programmes are described in the relevant documentation.
If the error message appears repeatedly, despite troubleshooting measures, please
contact the place of purchase or our customer service centre.
Fujitsu Technology Solutions
Troubleshooting
► Make sure that the printer is switched
on and ready for operation (refer to the
documentation supplied with the printer).
► Check that the data cable connecting
the notebook to the printer is properly
connected.
► Check that the data cable connecting
the notebook to the printer is properly
connected.
► Check whether the correct printer driver is
loaded (refer to the printer documentation).
Troubleshooting
► Switch the radio component on (see
"Switching the wireless components on and
off", Page 43).
► Check whether the radio connection is
switched on via the software.
► Further information on using the radio
component can be found in the help files.
Troubleshooting
► Charge the battery.
Troubleshooting and tips
73